Catalogue

Book 4: Heating, Ventilation, and Air Conditioning (HVAC)

This book highlights the importance of maintaining consistent air temperature, cleanliness, and humidification for the comfort of people working or living in buildings such as office or apartment buildings.

The first unit in this book consists of five chapters, the first of which covers air conditioning. The second chapter describes the purpose and principles of humidification. The third chapter discusses fans for air distribution, and is followed by a chapter on ventilation and air filter types. The last chapter in this unit explains HVAC duct system classifications.

The second unit is about environmental systems. This unit also consists of five chapters and covers topics including air psychrometric properties and how to apply the psychometric chart. This unit guides you through cooling systems, exploring how heat gains and losses affect these systems, and describing the recovery methods used in the control of these systems. This chapter also provides an understanding of the design and function of HVAC control strategy.

The final unit in this book consists of two chapters that cover lubrication and bearings.

By the end of this book you will have the knowledge required to successfully operate a HVAC system. You will also understand the selection of lubricants for bearings throughout a refrigeration plant.

Purchasing options:

With this purchase, you will receive 6 months of access to online learning media and self‐assessments.

This product is also available as an eBook.

Important Note: The Refrigeration Plant Operator Edition 4 set is the only single source of learning materials that encompasses the topics required to successfully prepare for the following examinations:

• The interprovincial Refrigeration Operator Certificate of Competency
• The TSSA Refrigeration Operator Class B Operating Engineer Certification

This product is also available as an eBook

The Six PE 2nd Class Textbooks Edition 2.5 are sold both individually and in three volume sets (A1+A2+A3, B1+B2+B3). These learning materials were designed to directly address the March 2015 SOPEEC Revised Syllabus for 2nd Class Power Engineering certification. Each volume includes access codes allowing 6 months continuous access, after initial activation, to online resources, including learning media and computer graded Self Assessments specific to the content. These codes will time out three years from original print date.

IMPORTANT NOTE: Each volume includes access codes allowing 6 months continuous access, after initial activation, to online resources, including learning media and computer graded Self Assessments specific to the content. These codes will time out three years from original print date.

The current [Ed 2.5] and previous [Ed. 2.0] 2nd Class Textbooks are the only single source set of learning materials approved by both IPECC and SOPEEC to meet the Syllabus and Curriculum standards required to successfully prepare for 2nd Class National Certification Examinations.

Outline

• SOPEEC Revised National Syllabus (2012) & Current IPECC Curriculum Document

This product is also available as an eBook

The Six PE 2nd Class Textbooks Edition 2.5 are sold both individually and in three volume sets (A1+A2+A3, B1+B2+B3). These learning materials were designed to directly address the March 2015 SOPEEC Revised Syllabus for 2nd Class Power Engineering certification. Each volume includes access codes allowing 6 months continuous access, after initial activation, to online resources, including learning media and computer graded Self Assessments specific to the content. These codes will time out three years from original print date.

IMPORTANT NOTE: Each volume includes access codes allowing 6 months continuous access, after initial activation, to online resources, including learning media and computer graded Self Assessments specific to the content. These codes will time out three years from original print date.

The current [Ed 2.5] and previous [Ed. 2.0] 2nd Class Textbooks are the only single source set of learning materials approved by both IPECC and SOPEEC to meet the Syllabus and Curriculum standards required to successfully prepare for 2nd Class National Certification Examinations.

Outline

• SOPEEC Revised National Syllabus (2012) & Current IPECC Curriculum Document

This product is also available as an eBook

The Six PE 2nd Class Textbooks Edition 2.5 are sold both individually and in three volume sets (A1+A2+A3, B1+B2+B3). These learning materials were designed to directly address the March 2015 SOPEEC Revised Syllabus for 2nd Class Power Engineering certification. Each volume includes access codes allowing 6 months continuous access, after initial activation, to online resources, including learning media and computer graded Self Assessments specific to the content. These codes will time out three years from original print date.

IMPORTANT NOTE: Each volume includes access codes allowing 6 months continuous access, after initial activation, to online resources, including learning media and computer graded Self Assessments specific to the content. These codes will time out three years from original print date.

The current [Ed 2.5] and previous [Ed. 2.0] 2nd Class Textbooks are the only single source set of learning materials approved by both IPECC and SOPEEC to meet the Syllabus and Curriculum standards required to successfully prepare for 2nd Class National Certification Examinations.

Outline

• SOPEEC Revised National Syllabus (2012) & Current IPECC Curriculum Document

This product is also available as an eBook

The Six PE 2nd Class Textbooks Edition 2.5 are sold both individually and in three volume sets (A1+A2+A3, B1+B2+B3). These learning materials were designed to directly address the March 2015 SOPEEC Revised Syllabus for 2nd Class Power Engineering certification. Each volume includes access codes allowing 6 months continuous access, after initial activation, to online resources, including learning media and computer graded Self Assessments specific to the content. These codes will time out three years from original print date.

IMPORTANT NOTE: Each volume includes access codes allowing 6 months continuous access, after initial activation, to online resources, including learning media and computer graded Self Assessments specific to the content. These codes will time out three years from original print date.

The current [Ed 2.5] and previous [Ed. 2.0] 2nd Class Textbooks are the only single source set of learning materials approved by both IPECC and SOPEEC to meet the Syllabus and Curriculum standards required to successfully prepare for 2nd Class National Certification Examinations.

Outline

• SOPEEC Revised National Syllabus (2012)
• Current IPECC Curriculum Document

This product is also available as an eBook

The Six PE 2nd Class Textbooks Edition 2.5 are sold both individually and in three volume sets (A1+A2+A3, B1+B2+B3). These learning materials were designed to directly address the March 2015 SOPEEC Revised Syllabus for 2nd Class Power Engineering certification. Each volume includes access codes allowing 6 months continuous access, after initial activation, to online resources, including learning media and computer graded Self Assessments specific to the content. These codes will time out three years from original print date.

IMPORTANT NOTE: Each volume includes access codes allowing 6 months continuous access, after initial activation, to online resources, including learning media and computer graded Self Assessments specific to the content. These codes will time out three years from original print date.

The current [Ed 2.5] and previous [Ed. 2.0] 2nd Class Textbooks are the only single source set of learning materials approved by both IPECC and SOPEEC to meet the Syllabus and Curriculum standards required to successfully prepare for 2nd Class National Certification Examinations.

Outline

• SOPEEC Revised National Syllabus (2012) & Current IPECC Curriculum Document

This product is also available as an eBook

The Six PE 2nd Class Textbooks Edition 2.5 are sold both individually and in three volume sets (A1+A2+A3, B1+B2+B3). These learning materials were designed to directly address the March 2015 SOPEEC Revised Syllabus for 2nd Class Power Engineering certification. Each volume includes access codes allowing 6 months continuous access, after initial activation, to online resources, including learning media and computer graded Self Assessments specific to the content. These codes will time out three years from original print date.

IMPORTANT NOTE: Each volume includes access codes allowing 6 months continuous access, after initial activation, to online resources, including learning media and computer graded Self Assessments specific to the content. These codes will time out three years from original print date.

The current [Ed 2.5] and previous [Ed. 2.0] 2nd Class Textbooks are the only single source set of learning materials approved by both IPECC and SOPEEC to meet the Syllabus and Curriculum standards required to successfully prepare for 2nd Class National Certification Examinations.

Outline

• SOPEEC Revised National Syllabus (2012) & Current IPECC Curriculum Document

This text provides an operational overview of steam turbine design, construction, operations and maintenance. It includes a discussion of steam turbine auxiliaries with an emphasis on condensers. An applied theoretical treatment of rotating equipment maintenance and monitoring is also included.

Thermodynamics Problem Solving Volume 1 is designed for individuals preparing to write the Fourth Class Part A exam or the Third Class A1 exam. Over 300 worked examples and problems are an enhancement to the PanGlobal thermodynamics sections for Fourth Class and Third Class. This volume will also assist those who are preparing to write the Second Class and First Class thermodynamics exams and require a review of earlier thermodynamics.

Thermodynamics Problem Solving Volume 2 is designed for individuals preparing to write the Second Class Part A2 exam or the First Class A1 exam. This product will also be useful to those looking to increase their understanding of thermodynamics, and to those wishing to maintain a level of competency in thermodynamics.

This product is also available as an eBook

The Power Engineering Third Class Part A textbook set is designed for Fourth-Class Power Engineers who wish to advance their careers, upgrade their knowledge, and prepare for the Third Class certification exams. This textbook set contains two volumes: Part A1 & Part A2.



Features and upgrades:

    •    12 months of access to online learning media and self-assessments
    •    New learning objectives aligned with 2021 IPECC curriculum updates
    •    New end-of-chapter and LMS questions for each new learning objective
    •    New and updated images, including colour photos and drawings
    •    New Terminology feature to explain industry terms and jargon
    •    Latest codes, standards, and regulations
    •    Back-of-book glossaries

Outline

Important Note
The following sets are the only single source set of learning materials approved by both IPECC & SOPEEC to meet the Syllabus & Curriculum standards required to successfully prepare for the 3rd Class National Certification Examinations:
•    Third Class Edition 3, comprised of:
        o    Third Class Part A Textbook Set (Ed. 3), and
        o    Third Class Part B Textbook Set (Ed. 3)
•    Third Class Textbook Set (Ed. 2.5)

This product is also available as an eBook

The Power Engineering Third Class Part B textbook set is designed for Fourth-Class Power Engineers who wish to advance their careers, upgrade their knowledge, and prepare for the Third Class certification exams. This textbook set contains two volumes: Part B1 & Part B2.

Features and upgrades:

    •    12 months of access to online learning media and self-assessments
    •    New learning objectives aligned with 2021 IPECC curriculum updates
    •    New end-of-chapter and LMS questions for each new learning objective
    •    New and updated images, including colour photos and drawings
    •    New Terminology feature to explain industry terms and jargon
    •    Latest codes, standards, and regulations
    •    Back-of-book glossaries

Outline

Important Note
The following sets are the only single source set of learning materials approved by both IPECC & SOPEEC to meet the Syllabus & Curriculum standards required to successfully prepare for the 3rd Class National Certification Examinations:
•    Third Class Edition 3, comprised of:
        o    Third Class Part A Textbook Set (Ed. 3), and
        o    Third Class Part B Textbook Set (Ed. 3)
•    Third Class Textbook Set (Ed. 2.5)