This product reflects the 2015 editions of the ASME Boiler and Pressure Vessel Code and the 2014 ASME Code for Pressure Piping. 

This reorganized volume contains sections of: 

1. ASME I Power Boilers
2. ASME IV Heating Boilers
3. ASME VIII Div.1 Pressure Vessels, and
4. ASME B31.1 Power Piping. 

This volume is essential for all students of Power Engineering – from 4th Class to 1st Class, as well as for students enrolled in the first year of Two Year Power Engineering Technology Diploma programs. 

This product is available as a Textbook.

This product reflects the 2015 editions of the ASME Boiler and Pressure Vessel Code and the 2014 ASME Code for Pressure Piping. 

This reorganized volume contains sections of: 

1. ASME IX Welding
2. ASME B31.3 Process Piping
3. ASME II-D Materials

This volume is recommended for students of Power Engineering – from 3rd Class to 1st Class, as well as for students in the second year of Two Year Power Engineering Technology Diploma programs.

This product is available as a Textbook.

• Handbook of Formulae and Physical Constants
• Steam Tables in SI Units
• Properties of Refrigerants in SI Units with fold-out Psychrometric Chart

Edition 2.0 addresses technological change by incorporating updated content, and supports the latest editions of PanGlobal texts, including the 4^th Class Edition 3. 

The Academic Supplement Edition 2.0 has a revised refrigeration section featuring:

• Refrigerant data conforms consistently to ASHRAE data protocols
• New, easier to read charts and tables
• Extensive super heat tables
• Data for refrigerants currently in use, including natural refrigerants

In addition to these changes, Edition 2.0 has an up-to-date periodic table with more useful data. Other changes have made it easier for learners to apply formulas, and physical constants have been re-validated.

This book is also available as a textbook.

Power Engineering Fifth Class eBook (Edition 3.5) – Book 1: Low Pressure Boiler Components and Operation
This eBook is the first in the three-volume set that comprises the Power Engineering Fifth Class course. These eBooks prepare learners to write the SOPEEC Fifth Class Power Engineer Certificate of Competency examination in British Columbia, Alberta, Saskatchewan, Manitoba, Yukon Territory, and Northwest Territories. Other jurisdictions may recommend this three-volume set for low-pressure heating plant certificate examinations.

Purchasing options:
●    Purchase the eBook. With this purchase, you will receive 6 months of access to online learning media and self‐assessments.

Features and upgrades:
●    Online learning media and self-assessments
●    New refrigeration content aligned with the Montreal Protocol on Substances that Deplete the Ozone Layer
●    Updated information on refrigeration safety
●    Latest codes, standards, and regulations
●    Clarifications and corrections

Important Note: The Power Engineering Fifth Class Edition 3.5 eBook set is the only single source of eBook learning materials approved by both IPECC and SOPEEC to meet the syllabus and curriculum standards required to successfully prepare for the Fifth-Class Power Engineer Certificate of Competency examination.

For a comprehensive outline of this book and the topics included, see its outline.

Outline

Power Engineering Fifth Class eBook (Edition 3.5) – Book 2: Elements of Human Comfort in Facility Operation
This eBook is the second in the three-volume set that comprises the Power Engineering Fifth Class course. These eBooks prepare learners to write the SOPEEC Fifth Class Power Engineer Certificate of Competency examination in British Columbia, Alberta, Saskatchewan, Manitoba, Yukon Territory, and Northwest Territories. Other jurisdictions may recommend this three-volume set for low-pressure heating plant certificate examinations.

Purchasing options:
●    Purchase the eBook. With this purchase, you will receive 6 months of access to online learning media and self‐assessments.

Features and upgrades:
●    Online learning media and self-assessments
●    New refrigeration content aligned with the Montreal Protocol on Substances that Deplete the Ozone Layer
●    Updated information on refrigeration safety
●    Latest codes, standards, and regulations
●    Clarifications and corrections

Important Note: The Power Engineering Fifth Class Edition 3.5 eBook set is the only single source of eBook learning materials approved by both IPECC and SOPEEC to meet the syllabus and curriculum standards required to successfully prepare for the Fifth-Class Power Engineer Certificate of Competency examination.

For a comprehensive outline of this book and the topics included, see its outline.

Power Engineering Fifth Class eBook (Edition 3.5) – Book 3: Basic Physical Science, Safety and Regulation for Facility Operation

This eBook is the third in the three-volume set that comprises the Power Engineering Fifth Class course. These eBooks prepare learners to write the SOPEEC Fifth Class Power Engineer Certificate of Competency examination in British Columbia, Alberta, Saskatchewan, Manitoba, Yukon Territory, and Northwest Territories. Other jurisdictions may recommend this three-volume set for low-pressure heating plant certificate examinations.

Purchasing options:
●    Purchase the eBook. With this purchase, you will receive 6 months of access to online learning media and self‐assessments.

Features and upgrades:
●    Online learning media and self-assessments
●    New refrigeration content aligned with the Montreal Protocol on Substances that Deplete the Ozone Layer
●    Updated information on refrigeration safety
●    Latest codes, standards, and regulations
●    Clarifications and corrections

Important Note: The Power Engineering Fifth Class Edition 3.5 eBook set is the only single source of eBook learning materials approved by both IPECC and SOPEEC to meet the syllabus and curriculum standards required to successfully prepare for the Fifth-Class Power Engineer Certificate of Competency examination.

For a comprehensive outline of this book and the topics included, see its outline.

The 5th Class Edition 3.5 eBooks were extensively revised in 2017 to meet the recent changes to the SOPEEC Fifth Class Reference Syllabus. This 3 volume set prepares students to challenge the current SOPEEC 5th Class Power Engineering certification examination.

Purchasing options:

• Purchase the set. With this purchase, you will receive 12 months of access to online learning media and self‐assessments.

This product is available as a Textbook.

Fireman Boiler Operator for Saskatchewan (Ed. 1)

The Fireman Boiler Operator Handbook for Saskatchewan comprises the subject matter outlined under TSASK’s Fireman Boiler Operator certificate and will familiarize individuals with the knowledge and concepts required. This set includes two volumes focused on the technical knowledge required for a Boiler Operator (Fireman) along with Industrial Legislation specific to the province of Saskatchewan.

Topics covered include:

·         Industrial Legislation for Fireman Boiler Operators

·         Safety

·         Introduction to Thermodynamics

·         Introduction to Boilers, Steam Heating, and Hot Water Heating

·         Boiler Operations

·         Water Treatment

·         Plant Equipment

·         Electric Controls

·         Building Services

Note: This product has been developed to meet the requirements set out by the Technical Safety Authority of Saskatchewan (TSASK) for Fireman Boiler Operator certification. For jurisdictions outside of Saskatchewan, please refer to the Boiler Operator (Fireman) Handbook.

Outline

First Class eBook - A1 (Edition 2)

This product is also available as a textbook.

The eight First Class (Edition 2) eBooks collectively cover all sections of SOPEEC's Revised First Class Syllabus (2012; A1, A2, A3, A4, B1, B2, B3, and B4). Edition 2 features an updated layout to assist learning as well as updated colour images to ensure details are clear.

This volume on Applies thermodynamics and Plant Cycles discusses such topics as:

• Rankine and Brayton Cycles
• Thermodynamics of Steam
• Steady Flow Process Calculations
• Thermodynamics of Perfect Gasses
• Expansion and Heat Transfer
• Refrigeration Calculations

First Class eBook - A2 (Edition 2)

This product is also available as a textbook.

The eight First Class (Edition 2) books collectively cover all sections of SOPEEC's Revised First Class Syllabus (2012; A1, A2, A3, A4, B1, B2, B3, and B4). Edition 2 features an updated layout to assist learning as well as updated colour images to ensure details are clear.

This volume on Principles of Applied and Fluid Mechanics discusses such topics as:

First Class eBook - A3 (Edition 2)

This product is also available as a textbook.

The eight First Class (Edition 2) books collectively cover all sections of SOPEEC's Revised First Class Syllabus (2012; A1, A2, A3, A4, B1, B2, B3, and B4). Edition 2 features an updated layout to assist learning as well as updated colour images to ensure details are clear.

This volume on Applied Engineering Technologies discusses such topics as:

First Class eBook - A4 (Edition 2)

This product is also available as a textbook.

The eight First Class (Edition 2) books collectively cover all sections of SOPEEC's Revised First Class Syllabus (2012; A1, A2, A3, A4, B1, B2, B3, and B4). Edition 2 features an updated layout to assist learning as well as updated colour images to ensure details are clear.

This volume on Power Plant Operations discusses such topics as: