Catalogue

This product reflects the 2015 editions of the ASME Boiler and Pressure Vessel Code and the 2014 ASME Code for Pressure Piping. 

This reorganized volume contains sections of: 

1. ASME I Power Boilers
2. ASME IV Heating Boilers
3. ASME VIII Div.1 Pressure Vessels, and
4. ASME B31.1 Power Piping. 

This volume is essential for all students of Power Engineering – from 4th Class to 1st Class, as well as for students enrolled in the first year of Two Year Power Engineering Technology Diploma programs. 

This product is available as a Textbook.

This product reflects the 2015 editions of the ASME Boiler and Pressure Vessel Code and the 2014 ASME Code for Pressure Piping. 

This reorganized volume contains sections of: 

1. ASME IX Welding
2. ASME B31.3 Process Piping
3. ASME II-D Materials

This volume is recommended for students of Power Engineering – from 3rd Class to 1st Class, as well as for students in the second year of Two Year Power Engineering Technology Diploma programs.

This product is available as a Textbook.

• Handbook of Formulae and Physical Constants
• Steam Tables in SI Units
• Properties of Refrigerants in SI Units with fold-out Psychrometric Chart

Edition 2.0 addresses technological change by incorporating updated content, and supports the latest editions of PanGlobal texts, including the 4^th Class Edition 3. 

The Academic Supplement Edition 2.0 has a revised refrigeration section featuring:

• Refrigerant data conforms consistently to ASHRAE data protocols
• New, easier to read charts and tables
• Extensive super heat tables
• Data for refrigerants currently in use, including natural refrigerants

In addition to these changes, Edition 2.0 has an up-to-date periodic table with more useful data. Other changes have made it easier for learners to apply formulas, and physical constants have been re-validated.

This book is also available as a textbook.

Outline

Power Engineering Fifth Class eBook (Edition 3.5) – Book 1: Low Pressure Boiler Components and Operation
This eBook is the first in the three-volume set that comprises the Power Engineering Fifth Class course. These eBooks prepare learners to write the SOPEEC Fifth Class Power Engineer Certificate of Competency examination in British Columbia, Alberta, Saskatchewan, Manitoba, Yukon Territory, and Northwest Territories. Other jurisdictions may recommend this three-volume set for low-pressure heating plant certificate examinations.

Purchasing options:
●    Purchase the eBook. With this purchase, you will receive 6 months of access to online learning media and self‐assessments.

Features and upgrades:
●    Online learning media and self-assessments
●    New refrigeration content aligned with the Montreal Protocol on Substances that Deplete the Ozone Layer
●    Updated information on refrigeration safety
●    Latest codes, standards, and regulations
●    Clarifications and corrections

Important Note: The Power Engineering Fifth Class Edition 3.5 eBook set is the only single source of eBook learning materials approved by both IPECC and SOPEEC to meet the syllabus and curriculum standards required to successfully prepare for the Fifth-Class Power Engineer Certificate of Competency examination.

For a comprehensive outline of this book and the topics included, see its outline.

Power Engineering Fifth Class eBook (Edition 3.5) – Book 2: Elements of Human Comfort in Facility Operation
This eBook is the second in the three-volume set that comprises the Power Engineering Fifth Class course. These eBooks prepare learners to write the SOPEEC Fifth Class Power Engineer Certificate of Competency examination in British Columbia, Alberta, Saskatchewan, Manitoba, Yukon Territory, and Northwest Territories. Other jurisdictions may recommend this three-volume set for low-pressure heating plant certificate examinations.

Purchasing options:
●    Purchase the eBook. With this purchase, you will receive 6 months of access to online learning media and self‐assessments.

Features and upgrades:
●    Online learning media and self-assessments
●    New refrigeration content aligned with the Montreal Protocol on Substances that Deplete the Ozone Layer
●    Updated information on refrigeration safety
●    Latest codes, standards, and regulations
●    Clarifications and corrections

Important Note: The Power Engineering Fifth Class Edition 3.5 eBook set is the only single source of eBook learning materials approved by both IPECC and SOPEEC to meet the syllabus and curriculum standards required to successfully prepare for the Fifth-Class Power Engineer Certificate of Competency examination.

For a comprehensive outline of this book and the topics included, see its outline.

Power Engineering Fifth Class eBook (Edition 3.5) – Book 3: Basic Physical Science, Safety and Regulation for Facility Operation

This eBook is the third in the three-volume set that comprises the Power Engineering Fifth Class course. These eBooks prepare learners to write the SOPEEC Fifth Class Power Engineer Certificate of Competency examination in British Columbia, Alberta, Saskatchewan, Manitoba, Yukon Territory, and Northwest Territories. Other jurisdictions may recommend this three-volume set for low-pressure heating plant certificate examinations.

Purchasing options:
●    Purchase the eBook. With this purchase, you will receive 6 months of access to online learning media and self‐assessments.

Features and upgrades:
●    Online learning media and self-assessments
●    New refrigeration content aligned with the Montreal Protocol on Substances that Deplete the Ozone Layer
●    Updated information on refrigeration safety
●    Latest codes, standards, and regulations
●    Clarifications and corrections

Important Note: The Power Engineering Fifth Class Edition 3.5 eBook set is the only single source of eBook learning materials approved by both IPECC and SOPEEC to meet the syllabus and curriculum standards required to successfully prepare for the Fifth-Class Power Engineer Certificate of Competency examination.

For a comprehensive outline of this book and the topics included, see its outline.

First Class eBook - A1 (Edition 2)

This product is also available as a textbook.

The eight First Class (Edition 2) eBooks collectively cover all sections of SOPEEC's Revised First Class Syllabus (2012; A1, A2, A3, A4, B1, B2, B3, and B4). Edition 2 features an updated layout to assist learning as well as updated colour images to ensure details are clear.

This volume on Applies thermodynamics and Plant Cycles discusses such topics as:

• Rankine and Brayton Cycles
• Thermodynamics of Steam
• Steady Flow Process Calculations
• Thermodynamics of Perfect Gasses
• Expansion and Heat Transfer
• Refrigeration Calculations

First Class eBook - A2 (Edition 2)

This product is also available as a textbook.

The eight First Class (Edition 2) books collectively cover all sections of SOPEEC's Revised First Class Syllabus (2012; A1, A2, A3, A4, B1, B2, B3, and B4). Edition 2 features an updated layout to assist learning as well as updated colour images to ensure details are clear.

This volume on Principles of Applied and Fluid Mechanics discusses such topics as:

First Class eBook - A3 (Edition 2)

This product is also available as a textbook.

The eight First Class (Edition 2) books collectively cover all sections of SOPEEC's Revised First Class Syllabus (2012; A1, A2, A3, A4, B1, B2, B3, and B4). Edition 2 features an updated layout to assist learning as well as updated colour images to ensure details are clear.

This volume on Applied Engineering Technologies discusses such topics as:

First Class eBook - A4 (Edition 2)

This product is also available as a textbook.

The eight First Class (Edition 2) books collectively cover all sections of SOPEEC's Revised First Class Syllabus (2012; A1, A2, A3, A4, B1, B2, B3, and B4). Edition 2 features an updated layout to assist learning as well as updated colour images to ensure details are clear.

This volume on Power Plant Operations discusses such topics as:

First Class eBook - B1 (Edition 2)

This product is also available as a textbook.

The eight First Class (Edition 2) books collectively cover all sections of SOPEEC's Revised First Class Syllabus (2012; A1, A2, A3, A4, B1, B2, B3, and B4). Edition 2 features an updated layout to assist learning as well as updated colour images to ensure details are clear.

This volume on Legislation and Codes for Industrial Equipment discusses such topics as:

First Class eBook - B2 (Edition 2)

This product is also available as a textbook.

The eight First Class (Edition 2) books collectively cover all sections of SOPEEC's Revised First Class Syllabus (2012; A1, A2, A3, A4, B1, B2, B3, and B4). Edition 2 features an updated layout to assist learning as well as updated colour images to ensure details are clear.

This volume on Safety, Loss, and Environmental Program Management discusses such topics as: